1. Remove the doors and fittings
Carefully mark each of the doors in pencil so you can remember where to put them back before carefully removing them to work on. This doesn’t have to be done all in one go, and you can even choose to do them one at a time, helping to keep some normality. Once they have been removed, Britons need to remove all the hinges and handles to give the doors a “smooth finish”.
2. Clean the cupboards
The experts said: “When you have removed the door’s fittings, you will need to clean the doors. It’s also good to clean the fittings, but cleaning hinges can be done later while waiting for the paint to dry. “For your paint to stay on the doors, you will need to make sure they are properly cleaned with a degreasing agent. It’s very normal for kitchen doors to attract grease, as it is part of all kitchens. “Even the smallest amount can ruin your paint job later, so take time to clean and degrease. You’ll be glad you did, as the largest part of painting your kitchen cupboards is the preparation of the wood.”
3. Sand the doors
Sanding down the doors will help the new paint to stick to the wood, so make sure they are super smooth and matte before moving on.
If you wish to switch up your handles and fittings, fill these holes in to completely change the look of your kitchen.
4. Apply a base coat
The pros continued: “Next is to paint the cupboard doors with a base paint of melamine primer. This paint doesn’t have a smell to it and will help protect the doors to last longer. “It is also key to helping the main application of paint to the doors.” Make sure this layer is done carefully to ensure it is smooth.
5. Paint the doors
Now it is time to paint the doors, working with thin coats so you don’t end up with a “poor finish” or even bubbles appearing.
The experts said: “Wait for your first coat to fully dry for two to three days and give it a very light sanding with fine grit. This helps with a better finish after the second coating. “After sanding, be sure to wipe down with a damp cloth to remove any dust. Apply your second coat of paint and wait for it to dry. This second coat should have covered the cupboard doors and give you a nice finish that is almost ready to hang.”
6. Attach fittings and hang the door
Once completely dry, you’ll need to put the fittings back onto the door. Putting on the same handles is one option, but if you are opting for new ones, make sure they have been measured before putting any holes in. When hanging the doors back on the cabinets, the experts at MyJobQuote.co.uk said it is normal to need to adjust their angle slightly. The pros noted: “It’s time to sit back and admire all your hard work. Choosing to paint your kitchen cupboards takes time and patience but is a rewarding DIY project when done right.”